tarm seven
Без учета НДС и стоимости доставки
$ 7,750.00
tarm seven 1
tarm seven 2
tarm seven 3
tarm seven 4
tarm seven 5
tarm seven 6
tarm seven 7
tarm seven 8
tarm seven 9
tarm seven 10
 

The tarm seven show laser projector is a pure diode solution with analog color modulation and a guaranteed output power of 6'900 mW.

  • 6'900 mW guaranteed output power
  • a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of only 0.9 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and great color fading
  • the tarm seven impresses with a very bright 638 nm red
  • newly developed electronics with calibration capability via a browser interface
  • MANUFACTURED IN GERMANY, with RTI high precision diodes array modules

 

The projector has good specifications with a beam diameter of ca. 3.5 mm and a beam divergence of only 0.9 mrad (full angle). It is equipped with a red (2'300 mW / 638 nm), a green (1'800 mW / 520 nm), and a blue (3'600 mW / 450 nm) diode laser source.

The tarm seven devices have very fast scanners, running at 45 kpps@8° ILDA and scanning a maximum scan angle of 50° (@30 kpps), upgrades to CT-scanners with 60 kpps@8° ILDA and a deflection angle of up to 68° (@35 kpps) are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

The tarm seven is controlled via ILDA and is equipped with a newly developed electronics with calibration capability via a browser interface. In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser directly via LAN (W-LAN is also possible with a suitable access point). Thanks to the browser interface, it is no longer necessary to operate the laser projector directly on the device (since this is often mounted at a height of several meters). All configurations can be conveniently done via a computer (PC, MAC, Linux), a tablet or a mobile phone.
Several units can be addressed at the same time, even the positioning of the devices on a virtual stage is possible. This makes it easy to identify the respective unit to be calibrated.

The housing of the tarm seven is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm seven is suitable for demanding show laser applications and graphics projections in clubs, bars and on medium-sized stages and can be used by beginners as well as professionals.



Производитель:
Tarm
Гарантированная оптическая мощность:
6'900 mW
Мощность Красного:
2'300 mW / 638 nm
Мощность Зеленого:
1'800 mW / 520 nm
Мощность Голубого:
3'600 mW / 450 nm
Лазер класса::
4
Лучевые технические характеристики (угол в 360°):
ca. 3.5 mm / 0.9 mrad
Сканер:
45 kpps@8° ILDA; optional as upgrade: CT-6210H incl. Rti RayScan driver: 60 kpps@8° ILDA, max. 68° (@35 kpps)
Угол сканирования:
50° (@30 kpps)
Лазерный источник:
Diode
Режим работы:
ILDA
Дополнительное оборудование:
browser interface for calibration, power cable, manual, key, interlock connector
Источник электропитания:
85 V - 250 V / AC
Расход мощности:
320 W
Размеры:
320/260/140 mm
Вес продукта:
12 kg
Инструкция по эксплуатации: