• .

  • .

  • .

  • .

Copyright 2019 - The Laserworld Group

tarm G10 OPSL (ShowNET)
Без учета НДС и стоимости доставки
14,800.00
tarm G10 OPSL (ShowNET) 1
tarm G10 OPSL (ShowNET) 2
tarm G10 OPSL (ShowNET) 3
tarm G10 OPSL (ShowNET) 4
tarm G10 OPSL (ShowNET) 5
tarm G10 OPSL (ShowNET) 6
tarm G10 OPSL (ShowNET) 7
tarm G10 OPSL (ShowNET) 8
tarm G10 OPSL (ShowNET) 9
tarm G10 OPSL (ShowNET) 10
 

The tarm G 10 OPSL show laser projector is a green Coherent Taipan OPSL solution with analog color modulation and a guaranteed output power of 9'000 mW.

The tarm G 10 OPSL (ShowNET) units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMXautomatic mode.
The G 10 OPSL (ShowNET) comes with integrated ShowNET network interface and free laser show software. Details in the box below.

  • 9'000 mW guaranteed output power after optics
  • very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
  • beam accuracy and beam shape are extremely advanced, so these units are suitable for demanding professional applications
  • green Coherent Taipan OPSL module, which stands out due to beam precision
  • Robust and dustproof housing, which also makes it possible to use it outdoors without problems

The tarm G10 OPSL has very good specifications with a beam diameter of ca. 2.7 mm and a beam divergence of only 1.0 mrad (full angle).

It is equipped with a green (10'000 mW / 530 nm) Coherent Taipan OPSL module. Other OPSL setups are also available on request.

The tarm G 10 OPSL devices have very fast scanners, running at 45 kpps@8° ILDA and scanning a maximum scan angle of 50°, upgrades to CT-scanners with >60 kpps@8° ILDA, LAS Turboscan driver and a deflection angle of up to 70° (@35 kpps) are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

This show laser light has a switchable scan safety and switches for x-axis and y-axis flip.

The housing of the tarm G 10 OPSL is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm G 10 OPSL is especially suitable for demanding show laser applications and graphics projections in clubs, bars and on stages

+ Integrated ShowNET incl. free laser show software

The tarm 5 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new Laserworld tarm 5 (ShowNET) for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

Hardware features of integrated ShowNET:

X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis)
Color outputs with 8 bit resolution (256 different intensity values per color channel): red, green, blue, intensity linked to green
DMX512 input and output (non-isolated)
100 Mbit Ethernet port
Flexible IP address setting: static address, DHCP or AutoIP
Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN
standalone operation and DMX IN/OUT via DMX-Adapter
Maximum scan speed ~100.000 points per second
Up to 16 devices can be used in parallel for multiprojector laser shows
Built-in ArtNet-to-DMX converter
Производитель:
Tarm
Гарантированная оптическая мощность:
9'000 mW
Мощность Зеленого:
10'000 mW / 530 nm
Лазер класса:
4
Лучевые технические характеристики (угол в 360°):
ca. 2.7 mm / <1.0 mrad
Сканер:
45kpps ILDA 8°
optional CT-6210H with LAS Turboscan: >60kpps ILDA 8°; max. 70°.
Угол сканирования:
50°
Лазерный источник:
OPSL
Режим работы:
ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave
optional: network interface Pangolin FB4
Дополнительное оборудование:
power cable, manual, key, interlock connector
Источник электропитания:
85 V - 250 V / AC
Расход мощности:
340 W
Размеры:
320/260/140 mm
Вес продукта:
12 kg
Инструкция по эксплуатации:



Distributed Brand Laserworld Distributed Brand tarm distributed brand Ray Technologies
Showcontroller logo greyShoweditor laser show software Distributed Brand Garden Star Distributed Brand Pangolin Distributed Brand coherent 

 

Laserworld Ibérica en España Laserworld Ibérica em Portugal Laserworld en Mexico Laserworld India Laserworld 日本 Laserworld 배달 Laserworld w Polsce Laserworld Türkiye