• .

  • .

  • .

  • .

Copyright 2019 - The Laserworld Group

tarm 5 FB4
Без учета НДС и стоимости доставки
5,899.00
tarm 5 FB4 1
tarm 5 FB4 3
tarm 5 FB4 4
tarm 5 FB4 5
tarm 5 FB4 6
tarm 5 FB4 7
tarm 5 FB4 8
tarm 5 FB4 9
tarm 5 FB4 10
 

The tarm 5 show laser projector is a pure diode solution with analog color modulation and already integrated Pangolin FB4 Quickshow 'Max'network interface. Guaranteed output power of 5'000 mW. The benefits include:

  • 5'000 mW guaranteed output power
  • network interface Pangolin FB4 Quickshow 'Max' is already integrated
  • a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and great color fading
  • the tarm 5 impresses with a very bright 638 nm single mode red
  • newly developed electronics with calibration capability via a browser interface
  • MANUFACTURED IN GERMANY, with high precision diodes array modules

The tarm 5 has good specifications with a beam diameter of ca. 3.5 mm and a beam divergence of less than 1.0 mrad (full angle).
It is equipped with a red (1'400 mW / 638 nm), a green (1'500 mW / 520 nm), and a blue (3'000 mW / 450 nm) diode laser source.

The tarm 5 devices have very fast scanners, running at 45kpps@8° ILDA and scanning a maximum scan angle of 45° (@30 kpps), upgrades to CT-scanners with 60kpps@8° ILDA and a deflection angle of up to 60° (@35kpps) are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

The tarm 5 is controlled via ILDA and is equipped with a newly developed electronics with calibration capability via a browser interface. In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser via LAN (W-LAN is also possible with a suitable access point). Thanks to the browser interface, it is no longer necessary to configure the laser projector directly on the device (since this is often mounted at a height of several meters). All configurations can be conveniently done via a computer (PC, MAC, Linux), a tablet or a mobile phone.
Several units can be addressed at the same time, even the positioning of the devices on a virtual stage is possible. This makes it easy to identify the respective unit to be calibrated.

The housing of the tarm 5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 5 is suitable for demanding show laser applications and graphics projections in clubs, bars and on small stages and can be used by beginners as well as professionals.

Pangolin FB4 Quickshow 'Max':

The tarm 5 FB4 show laser has an integrated Pangolin FB4 interface. The Pangolin FB4 is a network interface, which runs with Pangolin Quickshow or Pangolin BEYOND software (available as separate upgrade license). Pangolin Quickshow is already included. There is no need anymore to using ILDA cables to connect the show laser to the control computer.

Features of Pangolin FB4 Quickshow 'Max' are:

  • Full Ethernet control
  • Stand-alone SD memory card
  • Full color OLED display
  • Support for DMX and ILDA

The integrated full color OLED display provides various setting options:

  • Projector settings
  • Network settings
  • Color palette settings
  • Geometric corrections
  • Safety settings
  • etc.

The Pangolin FB4 'Max' runs the Pangolin Quickshow laser control software and offers the possibility to control the show laser system through TCP/IP network, DMX512 control or by the onboard SD-memory.

For network control:

Just connect a network cable (CAT5) from your computer, running Pangolin Quickshow (free software download on pangolin.com), to the network port of the Pangolin FB4.

For DMX512 control:

Just connect a DMX512 cable (XLR 5pin) from your DMX console or DMX interface to the DMX IN connector of the Pangolin FB4.

With SD-memory:

Create content in Pangolin software and then export this content to the onboard SD-memory (included in delivery). It is possible to playback the content from the SD-memory automatically, without the need for a computer.

Производитель:
Tarm
Гарантированная оптическая мощность:
5'000 mW
Мощность Красного:
1'400 mW / 638 nm
Мощность Зеленого:
1'500 mW / 520 nm
Мощность Голубого:
3'000 mW / 450 nm
Лазер класса:
4
Лучевые технические характеристики (угол в 360°):
ca. 3.5 mm / <1.0 mrad
Сканер:
45 kpps ILDA 8°
optional CT-6210H with LAS Turboscan: 60kpps ILDA 8°; max. 60°.
Угол сканирования:
max. 45°
Лазерный источник:
Diode
Режим работы:
network interface Pangolin FB4; DMX, ILDA
Дополнительное оборудование:
browser interface for calibration, power cable, manual, interlock connector
Источник электропитания:
85 V - 250 V / AC
Расход мощности:
230 W
Размеры:
320/260/140 mm
Вес продукта:
11.5 kg
Инструкция по эксплуатации:



Distributed Brand Laserworld Distributed Brand tarm distributed brand Ray Technologies
Showcontroller logo greyShoweditor laser show software Distributed Brand Garden Star Distributed Brand Pangolin Distributed Brand coherent 

 

Laserworld Ibérica en España Laserworld Ibérica em Portugal Laserworld en Mexico Laserworld India Laserworld 日本 Laserworld 배달 Laserworld w Polsce Laserworld Türkiye