• .

  • .

  • .

  • .

Copyright 2019 - The Laserworld Group

tarm 2.5 (ShowNET)
Без учета НДС и стоимости доставки
1,990.00
tarm 2.5 (ShowNET) 1
tarm 2.5 (ShowNET) 3
tarm 2.5 (ShowNET) 4
tarm 2.5 (ShowNET) 5
tarm 2.5 (ShowNET) 6
tarm 2.5 (ShowNET) 7
tarm 2.5 (ShowNET) 8
tarm 2.5 (ShowNET) 9
tarm 2.5 (ShowNET) 10
 

The tarm 2.5 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 2'700 mW after optics.
The tarm 2.5 (ShowNET) comes with integrated ShowNET network interface and free laser show software. Details in the box below.

The benefits include:

  • 2'700 mW guaranteed output power
  • a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and good color fading
  • the tarm 2.5 impresses with a very bright 638 nm single mode red
  • trim pots for adjusting color intensity

 

The tarm two laser has great beam specifications with a diameter of ca. 3.5 mm and a beam divergence of approx. 0.9 mrad (full angle).
It is equipped with a bright red (750 mW / 638 nm), a green (700 mW / 520 nm), and a blue (1'500 mW / 450 nm) diode laser source.

The scanners are very fast with 45 kpps@8° ILDA standard and allow for a maximum scan angle of 45° (@30 kpps). Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210H scanners incl. LAS Turboscan driver with 60 kpps@8° ILDA and a max. scan angle of 60° (@35 kpps).

This show laser light has a switchable scan safety and switches for x-axis and y-axis flip. Color intensity can be adjusted with trim pots per color channel.

The housing of the tarm 2.5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 2.5 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.

+ Integrated ShowNET incl. free laser show software

The tarm 2.5 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 2.5 (ShowNET) for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

Hardware features of integrated ShowNET:

X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis)
Color outputs with 8 bit resolution (256 different intensity values per color channel): red, green, blue, intensity linked to green
DMX512 input and output (non-isolated)
100 Mbit Ethernet port
Flexible IP address setting: static address, DHCP or AutoIP
Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN
standalone operation and DMX IN/OUT via DMX-Adapter
Maximum scan speed ~100.000 points per second
Up to 16 devices can be used in parallel for multiprojector laser shows
Built-in ArtNet-to-DMX converter
Производитель:
Tarm
Гарантированная оптическая мощность:
2'700 mW
Мощность Красного:
700 mW / 638 nm
Мощность Зеленого:
750 mW / 520 nm
Мощность Голубого:
1'500 mW / 450 nm
Лазер класса:
4
Лучевые технические характеристики (угол в 360°):
ca. 3.5 mm / <1.0 mrad
Сканер:
45kpps ILDA 8°
optional CT-6210H with LAS Turboscan: 60kpps ILDA 8°; max. 60°.
Угол сканирования:
max. 45°
Лазерный источник:
Diode
Режим работы:
ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave
Дополнительное оборудование:
power cable, manual, key, interlock connector
Источник электропитания:
85 V - 250 V / AC
Расход мощности:
100 W
Размеры:
220 / 220 / 150 mm
Вес продукта:
7 kg
Инструкция по эксплуатации:



Distributed Brand Laserworld Distributed Brand tarm distributed brand Ray Technologies
Showcontroller logo greyShoweditor laser show software Distributed Brand Garden Star Distributed Brand Pangolin Distributed Brand coherent 

 

Laserworld Ibérica en España Laserworld Ibérica em Portugal Laserworld en Mexico Laserworld India Laserworld 日本 Laserworld 배달 Laserworld w Polsce Laserworld Türkiye