Laserworld BeamBar 10RGB
Без учета НДС и стоимости доставки
$ 1,089.00
Laserworld BeamBar 10RGB 1
Laserworld BeamBar 10RGB 2
Laserworld BeamBar 10RGB 3
Laserworld BeamBar 10RGB 4
Laserworld BeamBar 10RGB 5
Laserworld BeamBar 10RGB 6
 

This special laser effect creates fans of laser beams and can be controlled through DMX or runs in stand-alone or music mode.


The BeamBar 10RGB is a bar with 10 single beam laser outlets. Of which three are equipped with a green DPSS laser source 80mW/532nm, four are equipped with a red diode laser source 150mW/650nm and another three are equipped with a blue diode 140mW/470nm.

The advantages of the BeamBar 10RGB are:

  • very bright colors
  • very affordable
  • a very good beam profile

This show laser light provides an analog modulation. It means a better color fading and a much broader color hue. These facts make the Laserworld BeamBar devices ideal for all applications requiring many different color hues and color fadings.

Each laser beam can be individually aligned through a 4-point alignment system, that can easily be accessed from the front - so no opening of the housing is necessary.

The BeamBar 10RGB can be controlled through 13 DMX channels, so each laser source can be controlled individually. Thus it's possible to create many different chaser, beam or fan effects.

Due to the standard DMX compatibility, the BeamBar 10RGB can easily be integrated into an existing lighting setup.

This laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.

The BeamBar 10RGB is a great effect for stages, live gigs and nightclubs, as well as for TV Shows and show productions.

Производитель:
Laserworld
Полная развиваемая мощность:
1'350mW
Гарантированная мощность:
1'200mW
Мощность Красного:
4 x 150mW / 650nm
Мощность Зеленого:
3 x 80mW / 532nm
Мощность Голубого:
3 x 140mW / 470nm
Лазер класса::
3B
Лучевые технические характеристики :
< 3.0mm / <1.5mrad
Лазерный источник:
Diode, DPSS
Режим работы:
DMX, stand-alone, sound-to-light, master-slave
Дополнительное оборудование:
Interlock connector, manual, key
Источник электропитания:
100V - 250V AC 50/60Hz
Расход мощности:
50W
Размеры:
1000 x 160 x 80 mm (l x w x h)
Вес продукта:
9.0 kg
Инструкция по эксплуатации: